Impact drill for concrete: what is it called, what drill can be used to drill

Without the proper equipment, drilling into concrete can be difficult. An impact drill is a necessary tool for anyone who needs to drill holes in this durable material. However, what precisely is an impact drill, and why does it work so well with concrete?

An impact drill, also called a hammer drill, combines a hammering action with the rotational motion of a standard drill. Because of this dual-action, it is easier to pierce hard surfaces like concrete because the drill bit rotates to remove debris while the hammering motion breaks up the material. This is a very helpful tool for jobs like putting up fixtures on concrete walls, hanging shelves, and installing anchors.

When working with concrete, selecting the appropriate drill bit is also very important. Conventional drill bits are prone to rapid wear and tear due to the hardness of concrete. Masonry bits made especially for drilling concrete are required instead. The carbide tip on these bits usually gives them the strength and durability required to handle the rough surface of concrete.

You can drill into concrete more effectively and with less effort if you use an impact drill equipped with the right masonry bit. Whether you’re a do-it-yourself enthusiast or a professional contractor, knowing the proper tools and techniques can greatly streamline your project. You’ll be confident enough to take on any concrete drilling task if you have the proper tools.

Choosing a tool and working with it

The best places to purchase drills in Moscow and other major cities are the big construction supply stores. In this scenario, the gadget will come with a guarantee that entitles you to free repairs in the event that it malfunctions. Furthermore, you ought to choose drills made by reputable manufacturers. You should consider the fact that a device that has an impact mechanism may be referred to as a hammer drill when making your selection.

Both speed and accuracy can be increased when drilling a hole with a high-quality, powerful tool. This work is better handled by an impact drill, which enables you to drill through concrete as well as crush it if needed. If the surface is covered in multiple layers of concrete mortar, using an impact drill is convenient.

Even thick concrete can be penetrated when using the hammer drill mode. When selecting a tool, there are several other factors that you should consider.

It would be ideal if the tool had a speed controller. You can change the amount of revolutions with it. This will enable you to work with greater precision. You can drill holes with a big diameter when the device is operating at its fastest speed, but there is a chance that chips and other flaws will occur. The inclusion of a speed lock and reverse is a desirable feature. Furthermore, the drill’s start should be smooth.

One thing to look for when deciding which device is better is if it has an auxiliary handle. Because a powerful impact drill is heavy, it can be operated with two hands if it has an extra handle. Whether a drill depth regulator is included is another crucial factor to consider when selecting a tool. When you need holes to be the proper depth, it makes it easier to control the hole-making process.

Furthermore, it is crucial that the chuck can accommodate drills with even larger diameters. In order to guarantee the safety of using the drill, it is imperative to pay attention to the existence of fuses.

It is crucial that the drill be conveniently held at a straight angle to the surface when using the tool. By doing this, the coating will not be damaged and the hole will not become skewed. After letting the tool run in idle mode for a while, only then should you begin using it. You’ll be able to get the drill ready to go by doing this. Furthermore, this will lessen the possibility that a sudden change in temperature will cause condensation to form inside the tool.

Surface preparation

The surface of the concrete needs to be prepared before using a drill to drill into it. Prior to making any holes in the concrete wall, you should confirm that there are no pipes or electrical cables inside the wall. Furthermore, reinforcement is frequently found in the floors and walls.

Avoid it if at all possible, as the drill may break if it comes into contact with such things. It is best to use a metal detector to locate pipes, cables, and reinforcement.

Marking the location of the hole that needs to be drilled with a marker comes first. Next, using any sharp object, make a small depression at this location. Furthermore, an impact drill can leave a deep impression. This is essential to prevent the tool from slipping when using it.

It should be noted that the surface decorative layer is porous, meaning that a drill hole can be easily made in it. The work becomes more challenging as soon as the tool penetrates the concrete because of an increase in resistance.

Choosing a drill

If you intend to drill holes, you will need to buy specific concrete attachments. An easily distinguishable feature of concrete drills is their triangular tip. A carbide compound that can tolerate contact with a high-strength surface is applied to their working part.

• carbide;
• diamond;
• universal.

Concrete is no match for carbide drills, but their lifespan is limited. The requirement for constant cooling is the drawback of universal attachments. Although they cost more, diamond drills are thought to be the most resilient.

It should be mentioned that drill bits with a unique tail design tailored for an SDS chuck with a diameter of 10–18 mm are frequently included with hammer drills.

A little about the design of the drill and the installation of the drill

Regardless of the manufacturer, the majority of drills come with

• body;
• gearbox with chuck;
• stator;
• bearings;
• anchor;
• brushes equipped with springs;
• power button;
• regulators;
• screws;
• reverse system;
• power cable;
• keys.

More structural components might be present in more costly models. Ensuring that the drill is correctly secured in the chuck is crucial, as it affects both the safety and quality of the work. The attachment has a good chance of flying out of the chuck and injuring someone if it is not tightened enough.

It is not advisable to attempt to lengthen the drill by only partially inserting it into the socket. The attachment must be submerged in the chuck until it stops. Then, using a unique key, you must clamp it.

Verify that the drill fastening in the center along the axis is correct before beginning any work. A little adjustment will result in a larger-than-necessary hole being drilled. Additionally, you should use a rag to clean the drill of any dirt before beginning any work.

When drilling into concrete, an impact drill—also referred to as a hammer drill—is necessary. This strong instrument breaks up the hard material by rotating while hammering, which facilitates the creation of holes. Masonry bits are made especially for drilling into concrete; they have a carbide tip that can withstand the hard surface of the concrete and a sturdy construction. Drilling into concrete surfaces can be done safely and effectively if an impact drill and the appropriate bits are used.

Selection of power for drills

Because concrete has a high strength, working with it requires high-power devices. The faster the device can drill through extremely hard surfaces, the more powerful it is. A high-quality gadget has power greater than 600 W. It should generate at least 2500 revolutions per minute simultaneously.

Errors when working with a drill

Certain mistakes made when operating a drill can result in subpar work, broken tools, and injuries. Don’t hold the tool by the chuck when drilling. Using a drill to slip your hand will damage it. Just use your body and the unique handle to hold the device.

Only work should be done while wearing gloves that fit tightly. It is simple for fabric options to get into the chuck and spin during rotation, which could cause harm. It is not advised to use excessive force when operating the drill. This situation increases the likelihood of falling and losing balance as well as drill breakage. It is improper for someone to place their hand on the back of a concrete surface because the drill bit could pierce it and seriously injure them.

To ensure success and safety when drilling into concrete, the proper tools and techniques are needed. Often called a hammer drill, an impact drill is made especially for this difficult task. Hammer drills, as opposed to ordinary drills, combine the hammering action of a regular drill with the rotation of a standard drill, facilitating easier penetration of hard surfaces like concrete.

Masonry bits are a must when selecting a drill bit for concrete. These have a carbide tip that is specifically made to withstand the demands of drilling into concrete. To get the best results and extend the life of your tools, always make sure the drill bit is sharp and in good condition.

It’s simple to use an impact drill on concrete, but there are some setup requirements. To begin drilling, mark your location, fasten the drill bit, and proceed slowly. After drilling a guide hole, you can speed up and let the hammering action help you drill further.

You can confidently take on concrete drilling projects if you know the right tools and procedures. When using an impact drill with the appropriate bit, you can accomplish tasks like installing anchors and making holes for wiring more quickly and effectively. You can become proficient in this crucial skill for any building or remodeling project with a little practice.

Video on the topic

Drills for drills and hammer drills. How to distinguish?

KEN 6110b – Safety clutch adjustment for safe drilling!

Concrete drill. Brick drill. Drill test.

Which is better, a hammer drill or an impact drill??

IMPACT DRILL OR PUNCHER | WHAT"S BETTER?

Drill versus screwdriver: purpose, features of use and how to drill concrete