How to plaster arbolite walls yourself

Arbolite wall plastering may appear like a difficult undertaking, but with the correct assistance, it’s a task you can complete by yourself. Arbolite, sometimes referred to as wood concrete, blends the strength of wood chips with the portability and insulating qualities of concrete. This makes it a fantastic option for energy- and environmentally-conscious building. Arbolite walls do, however, require a protective plaster layer to improve their longevity and visual appeal, just like any other material.

We’ll walk you through the plastering process for your arbolite walls in this guide, guaranteeing a polished and seamless finish. Plastering arbolite can greatly enhance the appearance and durability of your walls, whether you’re finishing a new construction or remodeling an old one. Everything from surface preparation to plaster application and attaining a smooth, uniform coat will be covered.

You can save labor costs and have the satisfaction of finishing a significant portion of the building or renovation of your home by adhering to these easy steps. Plastering your arbolite walls will become second nature to you if you have the proper tools and a little perseverance. Let’s get to work turning your walls into aesthetically pleasing, long-lasting surfaces.

Advantages of plastering arbolite walls

You can greatly enhance the properties of arbolite by applying plaster, as this type of coating serves the following purposes:

• Heat-insulating. The house retains heat without the "steam room" effect. Thanks to good vapor permeability, the plaster allows the arbolite to "breathe".
• Soundproofing. If the plaster is not painted, it will reliably protect you from unwanted noise.
• Waterproofing. Plastered arbolite repels water, so rooms with high humidity (but not more than 70%) do not require additional finishing. To enhance the water-repellent properties when applying plaster, it is recommended to use a shotcrete machine.

If the building’s walls are exposed to strong acid fumes, plaster is also required.

Plaster’s composition, which creates a rough surface and increases the plaster’s level of adhesion to the arbolite surface, is another benefit. In this instance, processing the walls and getting them ready for finishing won’t be necessary.

Furthermore, a building’s plastered facade should be updated no more frequently than once every eight to nine years. It only takes a small amount of money to "go over" the walls with primer in order to accomplish this.

When discussing plastering arbolite walls, it is important to note that there are various varieties of this type of finishing material.

Arbolite walls are more durable and aesthetically pleasing when you plaster them yourself. It’s a simple process. Smooth and appealing finishes can be obtained by simply preparing the surface, applying a base coat, and finishing with a top layer. Even novice plasterers can successfully finish their arbolite walls with the help of this guide’s simple instructions and advice.

Compositions of plaster for arbolite walls

The following varieties of plaster are advised for independent finishing of arbolite surfaces:

• Cement. A mixture of sifted sand and cement is suitable for standard walls with a thickness of about 30 cm. Plaster is applied with a thickness of 2 cm.
• Gypsum. Gypsum and various fillers are used as a finishing material.
• Lime. The main component is lime. In this case, after covering the surface with plaster, it is puttied over the primer and painted with facade paint.
• Compositions for decorative finishing. Such plasters come in different types: lime, acrylic, latex and others. Acrylic composition is considered the most convenient to work with. Decorative mixtures also have high vapor permeability.

To regular cement mortar, some experts add water-retaining additives or lime dough (approximately 0.5–1 part).

It’s important to keep in mind, though, that certain additions—like polystyrene foam, foam glass, or slag—will make it harder for the walls to "breathe." This occurs because the materials have varying vapor permeabilities, which causes a dew point to form (the walls freeze and become covered with damp spots inside). Expanded clay, barite, perlite, or vermiculite are suggested additives if you don’t want to interfere with arbolite’s ability to breathe.

The simplicity of plaster application on an arbolite surface sets it apart from other concrete processing methods. After construction, you can practically immediately apply a protective layer; surface treatment or the use of reinforcing meshes are not required.

Practical! Although the plaster composition will firmly "stick" to the surface, using a reinforcing mesh during plastering will extend the finish’s service life.

However, we advise you to familiarize yourself with some of the features of external and internal finishing with various materials before hastily plastering the walls of arbolite yourself.

DIY arbolite wall plastering can be a satisfying and economical endeavor. You can improve the look and usefulness of your walls with a smooth, long-lasting finish if you have the correct equipment and supplies.

Make sure the surface is clean and clear of debris before beginning any preparations. Plaster will adhere to the arbolite more readily if a primer is applied. To achieve the proper consistency, carefully follow the manufacturer’s instructions when mixing the plaster.

Your best bet is to apply the plaster in thin, even layers. Before adding the next layer, be patient and let the previous one completely dry. This will guarantee a smooth finish and lessen the chance of cracks. With patience and practice, you can create a surface that looks professional using a trowel and float.

Never forget to exercise caution when working in poorly ventilated areas or while wearing protective gear. Maintaining a tidy workspace will make plastering easier and safer as it can be a dusty task. Eventually, relish the joy of witnessing your labors pay off with exquisitely plastered arbolite walls.

Video on the topic

Plaster for arbolite

#3 Plastering arbolite, Nuances #arbolite_block #arbolitehouse #plaster

Plaster on Arbolite Block, Foundation of a House from Arbolite Block, We build from Arbolite Block in the South