How to paint walls after puttying and is it possible to do this

Applying a new coat of paint to your walls is usually the next step after puttying them. Painting your walls after puttying not only improves their visual appeal but also adds a layer of protection that makes the walls more resilient to deterioration. To guarantee the best outcomes, the procedure necessitates some meticulous preparation.

It is important to ensure that the putty is smooth and has fully dried before beginning to paint. If this step is skipped, the finish may be uneven and may peel later. A surface that will enable the paint to adhere well and last longer must be properly primed and sanded.

Selecting the appropriate paint type is also crucial. Varying degrees of durability, sheen, and application ease are found in different paints. By being aware of these variations, you can choose a paint that will look great and hold up over time.

We’ll walk you through the process of painting your walls after puttying in this post, emphasizing the best techniques and advice to get a perfect finish. Whether you’re new to do-it-yourself projects or an experienced one, these tips will give you the confidence to update your walls.

Step Description
1. Surface Preparation After puttying, make sure the walls are smooth and even. Sand any rough spots and clean off dust and debris.
2. Priming Apply a coat of primer to ensure the paint adheres well and to seal the putty. Let the primer dry completely.
3. Choosing Paint Select the appropriate paint type for your wall. Water-based paints are generally easier to use and clean up.
4. Painting Technique Use a roller for large areas and a brush for edges and corners. Apply the paint in thin, even layers, allowing each coat to dry before applying the next.
5. Number of Coats Two coats of paint are usually sufficient for good coverage, but more may be needed depending on the color and type of paint.
6. Final Touches Inspect the walls for any missed spots or uneven areas and touch them up as necessary. Let the paint cure fully before moving furniture or decor back.
7. Is it possible? Yes, you can paint walls after puttying. Proper preparation and priming are key to achieving a smooth and durable finish.

It is not only feasible, but also necessary to paint walls after puttying in order to achieve a polished, seamless finish. Painting the putty can improve its durability and appearance after it has completely dried and been sanded to a fine texture. Painting is more likely to adhere well and last longer when the surface is properly primed and cleaned. To ensure you achieve the best results for your home project, this guide will cover the necessary steps and advice for painting walls after puttying.

How and what can be used to paint surfaces after puttying

Painters use oil or some water-based paints to paint putty surfaces. For an even coat of paint, walls should be prepared for painting as quickly as possible.

  1. The walls are inspected, the volume of repair work is estimated. The consumption of finishing materials is affected by the quality of the base. Deviation from the vertical of the wall is estimated using the rule.
  2. Puttying is done with 2 compounds (starting, finishing), the work is carried out with a spatula, which is held at an angle of 30 °.
  3. Starting putty is applied in a layer of 50 mm, finishing – in 2 mm.
  4. The finished base is rubbed with fine-grained sandpaper.
  5. After the putty has dried, the paint composition is mixed in a container and applied with a roller to the wall.
  6. The first layer is dried, then the painted bases are re-tinted.
  7. Corner areas are painted with a thin brush.
  8. The treated base is dried.

Depending on the properties of the putty composition, choose which paint to use to paint the surfaces. Some options are:

  • polymer;
  • gypsum;
  • cement.

Polymer compositions

The best material for the final layer before painting is polymer putty. The composition is meant to be used indoors. The surface is smoothed with the solution’s assistance, making painting the walls easier. Tiny deformations are reduced thanks to the product’s fine structure. This particular kind of putty has a strong surface adherence and doesn’t peel off when used. The expensive nature of polymeric materials must be considered.

Water-based polyvinyl acetate paint is applied to the surfaces. The material dries quickly, is fireproof, comes in a variety of colors, is environmentally friendly, and is simple to apply.

Gypsum

Gypsum solutions are used in interior construction; they are effective in removing joints, small flaws, and cracks. Water-based acrylic or polyvinyl acetate paint is used to paint gypsum putty.

Putty has the advantages of being inexpensive, consuming little, having environmentally friendly ingredients, and being simple to grind. Because gypsum putty dries quickly, work is done in small spaces. The mass is not utilized for building facades, finishing rooms with high air humidity levels, or concrete bases.

Cement

Puttying before painting requires strong, long-lasting cement mixtures that are resistant to temperature fluctuations and air humidity. Lime is added to the putty in addition to cement powder, increasing the mass’s plasticity. The putty mixture stands out for being inexpensive and simple to use. The cement putty has a coarse-grained structure. Paints that are water-based and powder-based are applied to surfaces.

Wall painting options

An apartment’s walls can be painted with putty using colored paints, varnishes, or waxes. Manufacturers offer tinted plasters, while pigments are used to color other materials while they are being prepared.

  • plain tinting of wall panels;
  • tinting surfaces in several shades;
  • painting walls to resemble polished marble and Venetian plaster;
  • the “dry brush” technique allows you to create artificially natural unevenness on the base;
  • toning with the effect of highlighting individual areas.

Types of paints

Which paint is best for putty depends on a number of factors, including color, composition, texture, strength, wear resistance, water resistance, and layer density (covering power). Goods have to be safe for consumers and the environment. Paints for putty surfaces are made for both exterior (facade) and interior applications.

  • acrylic with high moisture resistance;
  • elastic silicone;
  • silicate moisture-resistant, easy to clean.

These coatings’ film layer on the surface gives them durability and precipitation resistance. Tinting can be used to alter the white tone found in many compositions. To achieve the desired tone, the material is mixed with multiple coloring pigments. A construction mixer is used to combine the mass.

The kind of base that coloring agents use varies.

Dry fast and have a nice appearance. Nevertheless, the material is not used in kitchens and is only appropriate for spaces with constant air temperature, such as living rooms and bedrooms.

How to do the job correctly

  1. After puttying and sanding, it is recommended to prime the base and only then paint. Surface treatment is required to increase the strength of the top finishing layer.
  2. The main tinting work is performed only after the primer has dried.
  3. The paint is mixed, the tinting agent is added. Experts recommend mixing the composition immediately for the area of ​​the room to create a single shade.
  4. The roller for painting is selected in accordance with the level of density and composition of the dye. Water-based material is applied with a foam roller, other paints – with a velor roller.
  5. The paint is distributed in even movements from the left side of the wall to the right.
  6. The dye is applied in 2 layers, the first is pre-dried, then the next one is applied. If the drying time of the dye is not observed, when re-applying the composition, there will be smudges, unevenness on the surface.
  7. Corner areas need to be painted with a brush.
  8. When creating a geometric pattern on the wall, masking tape is used.

It is not only feasible but also strongly advised to paint walls after puttying in order to achieve a polished, seamless finish. The puttied walls are first carefully prepared by sanding and cleaning them to make sure there are no dust particles or flaws. This preparatory step is essential because it creates the framework for an impeccable paint job.

Selecting the appropriate paint type is also crucial. The durability and ease of application of latex and acrylic paints make them popular options. Painting over primed walls will result in a more even and vibrant color and improved paint adhesion and longevity. Instead of applying one thick coat of paint, apply several thin coats to ensure a more uniform finish and prevent drips.

All things considered, painting walls after puttying is a simple procedure that can significantly improve any room’s appearance. You can get a stunning, long-lasting effect by taking the time to carefully prepare the walls, choose the right paint, and apply it. Whether you are a professional painter or a do-it-yourself enthusiast, these guidelines will help you achieve a polished and eye-catching finish.

Video on the topic

Subtleties of painting walls! Solving a common problem.

Painting. 9 mistakes THAT SHOULD NOT BE ALLOWED

Do-it-yourself wall puttying. How to putty walls after plastering.

🔥 PAINTING WALLS in 6 min

How to Putty Walls (EASILY and FAST)

Do-it-yourself wall puttying, under wallpaper, under painting, training video, wall puttying

High-quality preparation of a wall for painting. Video lesson. All stages

Which aspect of concrete application are you most interested in?
Share to friends
Andrey Ivanov

Experienced civil engineer with more than 20 years of experience. Specializing in the construction of industrial and civil facilities. Author of many publications in professional journals.

Rate author
StroyComfort1.com
Add a comment