How to make a pile-strip foundation with your own hands: advantages and disadvantages, step-by-step instructions

Any construction project must have a solid foundation, and for many different kinds of buildings, a pile-strip foundation is a great option. This kind of foundation is appropriate for both residential and commercial buildings because it combines the continuous support of a strip footing with the load-bearing capacity of piles. You can save money and have the satisfaction of knowing that your building is supported by a foundation you built yourself if you take on this project yourself.

It is advantageous to use a pile-strip foundation in many ways. Because the piles shift the weight of the building to deeper, more stable soil layers, it works especially well in areas with poor soil or uneven terrain. This kind of foundation also offers superior stability for a variety of building types and can be more affordable than a full-depth basement foundation. It’s crucial to be mindful of any potential drawbacks, though, like the requirement for exact calculations and the potential need for specialized equipment.

You must adhere to a set of meticulously thought-out procedures in order to construct a pile-strip foundation. These include clearing the site, laying out the foundation, setting the piles, building the strip footing, and making sure everything is safe and level at the end. In order to guarantee the foundation’s stability and longevity, each step needs to be carried out precisely. With a few simple tools, supplies, and a little know-how, you can finish this project and give your building a sturdy foundation.

This tutorial will take you step-by-step through the entire process, offering concise directions and useful advice as you go. Whether you’re an experienced do-it-yourselfer or a total beginner, you’ll find all the information you need to approach this project with assurance. Prepare to lay a pile-strip foundation that will withstand the ages by rolling up your sleeves.

What is a pile-strip foundation

You must first comprehend the design elements.

A strip-pile foundation consists of supports located in the ground below the freezing point, and a grillage. The tape allows you to evenly distribute the load. The recessed part of the system does not allow the metal frame to shift under the influence of groundwater.

Longitudinal load distribution is poorer in the traditional design using screw piles. Whether the support beams are raised or lowered, the strip stays stable. Furthermore, this system is less costly.

What are the advantages

There are several benefits to using piles in a strip foundation:

• the ability to install on any soil composition and sites with complex terrain;
• the supports are driven into dense layers of earth, and the upper structure is located on loose soil;
• minimal use of construction equipment and raw materials (a device for screwing in the supports and a concrete mixer are required);
• the structure can withstand small shocks and soil movements;
• cast piles can be made independently from scrap materials;
• for bored supports, it is recommended to make square or round formwork;
• the technology is designed for an elevated location of groundwater;
• the base is erected in a few days; after the concrete has hardened, you can begin installing the walls.

Distinctions of the pile-strip foundation scheme

The following factors are responsible for this system’s drawbacks:

1. Many works have to be done manually. Punched wells do not allow the use of construction equipment for digging trenches.
2. When tying reinforcement to supports, some skills in constructing a horizontal frame are required. The reliability of the building depends on the height of the piles and the correctness of the strapping.
3. It is recommended to familiarize yourself with the bearing capacity of the soil in advance. Based on this data, the load on the surface is calculated.

The foundation is typically 35–42 centimeters below the zero mark. In order to create a pit, the top soil layer must be removed down to the bearing level. The next step is to deepen the hole to the backfill cushion’s height. A bonding compound is filled around the perimeter; the minimum height is 20 cm above the ground.

The building’s weight and the soil’s bearing capacity are taken into consideration when calculating the total height. Part of the design is hidden. This model represents a soil-related grillage.

It is possible to squeeze the base by the earth’s outer layer when the soil is extremely fluffy. In the worst case scenario, the concrete supports break off on the heads or leap out of the wells.

These kinds of situations arise when the construction rules are broken. A blind area is created, more sturdy supports are employed, or the foundation (to grillage) is rearranged to prevent such circumstances.

It can be a rewarding and affordable project to build your own pile-strip foundation, which provides sturdy support for a variety of structures. This post will walk you through every step of the procedure, from preparation and supplies to the last steps, all the while emphasizing the main advantages and possible disadvantages of this kind of foundation. Whether you’re a novice or an expert do-it-yourselfer, you’ll find simple, step-by-step directions to guarantee a sturdy foundation.

Types of piles

A combined design forms the strip foundation on screw stilts. The supports offer a robust clutch with the soil, and the walls of the house are built using a single tape.

Bore piles are used in a shallow technique most of the time.

• a small amount of excavation work;
• the ability to do everything yourself, without the involvement of specialists;
• easy transportation, t. k. All details of the scheme are created directly in the territory;
• the ability to do without special devices.

It’s a satisfying project that can save you money and provide you with a sense of accomplishment to build a pile-strip foundation yourself. Combining the best qualities of strip and pile foundations, this kind of foundation provides sturdy support for a wide range of building kinds. You can make sure that the foundation for your building is sturdy and stable by carefully following the instructions.

The adaptability of a pile-strip foundation to various soil conditions is one of its main benefits. The mix of piles and strips offers a reliable solution, regardless of the uneven terrain or poorer soil conditions. This foundation type is also more affordable than other approaches, which is another reason why many do-it-yourselfers and builders prefer it.

There are, however, a few drawbacks to take into account. Precise planning and execution are necessary when building a pile-strip foundation. It could call for specialized tools and equipment and be labor-intensive. Furthermore, improper execution may lead to problems like uneven settling, which could jeopardize the stability of your building.

You can approach the project with confidence if you are aware of the advantages as well as the difficulties. You will be able to establish a solid and trustworthy foundation by paying attention to the specific instructions and making sure every stage is finished correctly. You can successfully construct a pile-strip foundation that will support your building for many years if you are patient and pay close attention to detail.

Video on the topic

Pile-grillage foundation: doing it right

How to make a pile-grillage foundation with your own hands / Reinforcement / strip formwork

Life hack when pouring a pile-grillage foundation.

UNRELIABLE FOUNDATION! Gross VIOLATION of Building Regulations. Mistakes of Pile-Strip Foundation

DIY pile-strip foundation

The most STUPID idea for a foundation / Why a pile-strip foundation is complete crap

THE MOST RELIABLE Pile-strip foundation