How to drill a concrete wall with a regular drill: which tool and attachment to choose, practical advice

It may appear difficult to drill into concrete, particularly if you don’t have a specialized hammer drill. However, you can complete the task using a standard drill if you have the appropriate equipment and know how. You will learn what you need and how to proceed in a safe and efficient manner by following this guide.

Initially, selecting the appropriate drill bit is crucial. A masonry bit is required for concrete because it is made especially to handle the abrasiveness and hardness of concrete. These bits are typically more effective and long-lasting for this kind of work because of their carbide tips.

Next, make sure the drill is suitable for the job. While a standard drill will do the job, it will be much easier if the drill has a hammer function. If this feature is absent from your drill, you may need to take longer breaks to prevent overheating and tool damage.

Mark the location of the hole before you begin drilling, and make sure there are no hazards or obstacles in the way. Put on a dust mask and safety goggles to shield yourself from flying dust and debris. Maintain control over the drill and begin at a modest pace, building it up gradually as you advance.

You can drill into concrete with a standard drill by using the appropriate attachments and by adhering to these helpful tips. Compared to using a specialized tool, it might require a little more time and work, but with perseverance and attention to detail, you’ll get the desired results. Enjoy your drilling!

What to drill concrete walls with

Drilling concrete walls and ceilings is challenging because the debris makes the job more difficult.

To solve this issue, multiple tools are employed:

• a hammer drill;
• a drill with an impact mechanism;
• a regular electric drill;
• a powerful screwdriver;
• a diamond drilling machine.

For large-scale repairs, a hammer drill—which is meant to drill holes in hard building materials like brick and concrete—is more appropriate.

It uses its capabilities to accomplish this task:

• increased engine power;
• you can use various chisels;
• large drills can be used.

But using a hammer drill isn’t always a good idea.

• if you need to make holes of small depth — about 10 mm;
• for foam blocks — the material crumbles;
• if you need a lot of holes — the hammer drill overheats.

When purchasing a drill for wall drilling, it is considered that an impact drill is preferable over a hammerless drill because the chuck of the former quickly deteriorates under such circumstances. A powerful tool that you can purchase is a hammer drill.

With a standard drill and some specialized tools and attachments, you can drill a few holes. A high-power screwdriver is also used in place of a drill.

Diamond drilling is used for professional drilling of concrete structures. It makes no sense to purchase special, pricey equipment for use at home. It is preferable to leave the work to experts if the hole is complicated.

Diamond drills and other devices

Soldering runs the whole length of concrete rods, giving them exceptional strength. They maintain their technical characteristics even when working with hard materials.

Additionally, they are distinct from one another on the outside, making them difficult to mix up:

• a blunt end made of soldered carbide, which is almost as hard as diamond;
• The products are white, unlike black and light black for wood;
• The tip is wider than the rod.

Drones have comparatively small drill bits, and their tailings come in polyhedron or cylinder shapes. For large, SDS-marked perforators, they are more commonly referred to as brows than drills.

The style is unique:

• screw – for drilling deep holes;
• spiral – for large diameter holes;
• gentle – they make small holes.

The drill’s shank is thickened, and it snaps into the cartridge when inserted.

In the event that a wide hole needs to be drilled but no perforator is present, a specialized nozzle can be useful. With teeth that fit the drilling in solid surfaces, it is referred to as a crown. executed either through winning or diamond spraying.

Nozzle suffer: 35-120 mm. A unique requirement for crows measuring 68 mm in diameter is the size of the sockets. Drill no deeper than 150 mm; if more is needed, go deeper. Hammer drill crowns have soldered teeth, while drill crowns have a carbide coating in place of the teeth.

This has a few benefits: highly specialized hammer drill attachments need to be replaced, and the attachment drills both concrete and tiles equally well. An electric drill with a power output greater than one kilowatt can be used with the crown.

There are several kinds of attachments that work well for drilling:

1. Impact crowns with soldered teeth.
2. Diamond – for impact-free drilling without a hammer drill. They have an abrasive on the edge, they are faster to work with than impact.
3. KS crowns – with a coating on the edges.

Bosh, Makita, and Metabo provide high-quality products; domestic brands include Interskol and Zubr. If a Chinese product is expensive, it may also be of excellent quality.

Using a standard drill to drill a concrete wall can be difficult, but it is completely doable with the correct equipment and methods. This post will help you choose the right drill and concrete drill bit, as well as provide helpful hints to make the process go more smoothly and quickly. You can tackle concrete walls with confidence if you follow our step-by-step instructions, whether you’re installing fixtures or hanging shelves.

Practical advice from experts

It’s critical to use instruments and gadgets appropriately. Assemble a collection of drills with varying functionality. Different drills are required for the wood, tile, and stone facing concrete walls. Make sure there isn’t any wiring underneath the plaster where you plan to drill before beginning any work.

Use a metal drill bit if you come across reinforcement while drilling the wall. Experts sharpen their instruments to cut through metal, concrete, and other materials, but this takes a great deal of skill.

Prior to drilling, consider the following crucial points:

• for holes deeper than 10 cm and with a diameter greater than 12 mm, use a hammer drill;
• start work at low speeds, the impact function is turned on when the rod goes deep by 5 mm;
• holes for dowels are drilled 10 mm longer than the plastic case.

If the drill bit becomes stuck while drilling deeply, remove it and use a punch to develop the hole in order to break through the encountered stone and continue drilling.

Compared to carbide drills, diamond drills are more costly and should only be used without activating the impact mechanism. Every ten minutes, they must be cooled; this can only be accomplished in the absence of water.

With the correct equipment and a few helpful hints, drilling into concrete with a standard drill can be a simple task. Selecting the right drill and attachments is essential. To simplify and expedite the task, choose a drill that has a hammer function. Additionally, you can effectively penetrate concrete’s hard surface by using masonry bits with carbide tips.

Make sure the area is well marked before beginning drilling, and drill a pilot hole with a smaller bit. This keeps the drill bit from slipping and aids in drilling guidance. To guarantee a precise and neat hole, keep the drill perpendicular to the wall. Better results can also be obtained by using consistent pressure and letting the drill handle the majority of the task.

It’s crucial to take breaks throughout the procedure to prevent the drill and bit from overheating. If you come across reinforced steel, stop and temporarily switch to a metal bit. To keep yourself safe from dust and debris, always wear protective gear, such as goggles and a dust mask.

You can use a standard drill to drill precise, clean holes in your concrete wall if you follow these instructions and use the appropriate tools. You can finish your drilling tasks quickly and safely if you have a little patience and care.

Video on the topic

DIY / LIFE HACKS How to use a drill? How to drill into a concrete wall?

Drilling a concrete block with a screwdriver…

Drilling a wall with a screwdriver

AN EASY WAY TO DRILL CONCRETE

Socket boxes in concrete – easy and fast

A hole in concrete for an outlet in 5 minutes WITHOUT A CROWN. The main mistake of novice concrete drillers