How to cover a garage roof with your own hands?

Doing the covering yourself on your garage roof can be a satisfying project. It allows you to maintain control over the caliber of the work in addition to saving money. Doing it yourself is a practical solution, whether you’re dealing with leaks or just want a new look.

It’s crucial to gather all required tools and materials before you begin. Roofing supplies, such as metal panels or shingles, nails, a hammer, a measuring tape, and safety equipment are required. Making a plan in advance guarantees a more seamless procedure and helps prevent pointless trips to the hardware store.

Priority one when working on a roof is safety. If the roof is steep, always use a sturdy ladder and think about using a safety harness. Make sure everything in the vicinity of your garage is accident-free. It’s also essential to work on a calm, dry day to prevent slips and accidents.

If you prepare properly and follow a methodical process, covering your garage roof will be a doable task. The satisfaction of finishing the task at hand makes the effort worthwhile. Join us as we simplify the procedure into manageable steps.

Step	Description
1. Clean the Roof	Remove debris and clean the surface thoroughly.
2. Repair Any Damage	Fix any cracks or holes to create a smooth base.
3. Apply Primer	Use a primer to ensure better adhesion of the roofing material.
4. Measure and Cut Material	Measure the roof area and cut the roofing material to fit.
5. Install the Material	Start at the bottom edge and work upwards, securing the material properly.
6. Seal the Edges	Use a sealant to secure the edges and prevent leaks.
7. Inspect the Roof	Check for any missed spots or potential issues and fix them.

Selection criteria

Take into account the following characteristics when choosing a covering for a garage:

• service life of the material declared by the manufacturer;
• degree of reliability;
• price;

Selection criteria for roofing materials

• technological features of installation;
• possibility of self-installation;
• maintainability.

Remember that the building should blend in harmoniously with any adjacent residential buildings or capital structures. In this case, use the same kind of material to cover the garage as you have the house. A transportable detached building can have a cheap roof installed.

Breakdown into types

By using the services of specialized stores that provide a wide range of products, you can repair the roof on your garage yourself.

Materials that can be used to roof a garage

Let us categorize building materials into the following main types:

• Roll materials – roofing felt, roofing felt, linocrom.
• Profile sheets – galvanized, metal tiles and corrugated sheets.
• Asbestos-cement materials – slate.
• Bitumen-filled coatings – ondulin.
• Concrete slabs.

Examples of different roof styles that you can use for your garage

The design, load capacity, insulation viability, and other aspects all play a role in selecting a cost-effective, dependable roof. Let us examine the most effective methods for replacing a garage roof for various kinds of roofing systems.

Single-pitched structure

It won’t be difficult to arrange the roof if you built the garage walls yourself. Roll protection, of which roofing felt is a typical example, and profiled metal sheets with a profile height of more than 4 centimeters are better suited for a pitched roof.

Diagram of a garage’s single-pitched roof

If the surface has an angle of inclination less than 15 degrees, then slate and ondulin are not used. The integrity is violated by increased snow load and fragility at negative temperatures.

What to use for a gable option?

All roofing materials, with the exception of roll roofing, may be used on this kind of roof with a slope greater than 15 degrees. They are only used as a waterproofing base because they are difficult to melt due to the ceiling’s increased inclination. Use this for a gable roof structure:

• metal tiles;
• asbestos-cement slate;
• ondulin;
• profiled sheet.

Diagram of a garage’s gable roof structure

It is best to use a more rigid and durable material in areas with challenging climate conditions. Corrugated board will be the best choice in this case. Because of the longitudinal ribs that provide stiffness, it can support heavy loads and doesn’t get covered in snow.

The garage roof needs to be insulated if the space is heated. This will prevent condensation from forming, which raises humidity, and lower the cost of maintaining room temperature.

What is the best way to cover three- and four-pitched roofs

This is not a common option. This design can be roofed with the same materials that are used for a gable roof. Keep in mind that utilizing metal tiles will result in higher expenses due to waste production.

What to prefer for a mansard roof?

The attic above the room where the actual workshop is organized was a convenient feature that the owners of the transport company appreciated. There are at least 45 degree angles in the broken structure that makes up the roof. Increased forces are applied to the rafters as a result of the use of heavy coatings, such as slate and thick sheet metal.

An illustration of an ondulin-covered roof

Ideal usage:

• metal tiles;
• ondulin;
• galvanized profiled sheets.

Recall the necessity of performing trustworthy roof thermal protection and waterproofing.

Concrete roofing

For communal buildings with reinforced concrete roofing, concrete roofing is a conventional choice.

For a garage roof, concrete roofing

Roofing felt is a cheap and easy solution to use if the surface is not sealed and does not leak.

Characteristics

How can a garage roof be covered? What should I choose to ensure a long lifespan for my roof? Once the primary types of building materials’ features, qualities, and characteristics have been thoroughly examined, the answers to these questions can be determined. Together, we can weigh all the options, which will help you make the best choice down the road.

Roofing felt

Roofing felt is a low-temperature bitumen-impregnated roll of roofing material composed of cardboard. An extra layer of asbestos-sprinkled, high-temperature bitumen consistently protects it. practical for safeguarding difficult-to-reach places.

It is recommended to use ruberoid for floor waterproofing rather than as the primary roof coating.

The material for roofing has drawbacks.

• low strength;
• Relaxation;
• Fire hazard.

RUBMAST

RUBMAST is a more contemporary form of roofing material with enhanced qualities and a coating of granite chips. It is different from roofing material because it has an extra layer of protective polymer that increases its strength, resistance to moisture, and long service life. Rubemast does not melt or burn. An open flame is used for application to the surface.

Linker

Roller-style coating, or linker. consists of polyethylene films, binding bitumen, soft fiberglass, and coarsely disburdening sprinklers. Salary was applied to the roof.

Using a gas burner, linker is applied to the roof through fusion.

Professor or metal tile

These are contemporary corrugated galvanized facing sheets that let you finish the garage ceiling fast.Principal benefits:

• Increased rigidity provided by corrugations.
• High strength.
• Durability.
• Ease of installation.
• Wide range of colors.

The rust that appears on distorted and damaged areas of corrugated sheets is a drawback.

The roof structure is not burdened by the sealed coating. effectively conceals surface imperfections.

Slate

Slate is a flat, wavy asbestos-cement coating that has the following benefits:

• increased hardness;
• ability to withstand increased point loads;
• resistance to temperature effects,
• ease of processing;
• long service life;
• high corrosion resistance;
• low water absorption.

Dimensions and properties of slate

Unlike a metal profile, this material is reasonably priced and does not produce noise when it rains. Large mass and poor resistance to abrupt temperature changes are drawbacks. The roof requires a lot of physical labor to install and is easily damaged by careless handling. There is asbestos in the slate, which is harmful to health. Slate is a better roofing material than unreliable building materials for the garage, even with all of its drawbacks.

Ondulin

Durable and practical for the roof is strong bitumen ondulin. looks like slate on the outside, but inside are bitumen components, hardeners, cellulose, and mineral fillers instead of asbestos. It can withstand mechanical loads and is not hygroscopic.

One drawback of onluid is that it becomes more brittle in colder temperatures or more malleable in warmer temperatures.

Concrete plates

Concrete floors are very resilient and do not corrode or break easily. A few drawbacks include their heavy weight, slow deterioration from moisture exposure, and the need for specialized equipment during installation. Moreover, concrete slabs require extra safeguarding to keep moisture and dampness from showing up in the space.

If you use the right materials and follow the right procedures, covering a garage roof yourself can be a simple and satisfying project. This guide will help you through every step of the process, from preparing the roof surface and installing the covering to selecting the best roofing material for your climate and budget. You can have a strong, weatherproof roof that protects your garage and improves its appearance with simple tools and clear instructions.

Roofing technology

We suggest looking over the guidelines if you’re wondering how to cover a garage roof. It’s crucial to keep up with technology, regardless of your preferences.

Diagram for installing a roof

Then, you can get many years’ worth of use out of even the most affordable material.

Application of roll materials

Ruberoid is a widely used tool for roofing projects. Do you know how to apply roofing felt to a garage roof? Let’s examine in more detail:

• Prepare the base by cleaning the ceiling from resinous deposits, grease, and dirt. Remove old coating. If laying on a wooden base, then prepare a frame from edged boards.
• Apply bitumen to the base surface to create a waterproof waterproofing layer. If necessary, apply two coats.
• Lay the roofing felt in parallel strips with an overlap of 15 cm. Start from the bottom if the roofing felt is laid across the slope. Ensure that the strips overlap to allow water to drain unhindered. Use bitumen mastic to glue the roofing felt. Lay the euro roofing felt by melting the polymer layer with a blowtorch.
• Lay two layers of the coating. Connect the layers together with mastic. Roll the surface with a roller, smooth it out, remove air pockets.

We hope that the suggestions will assist in resolving the question of how to cover a garage roof with roofing felt. It’s not hard at all!

Laying sheet roofing

Dealing with sheet material presents unique challenges. Order of operations:

• Prepare the base by laying vapor and waterproofing. Use roll coatings with anti-condensation characteristics. Using a furniture stapler, lay the film across the surface, ensuring a sag of up to 5 centimeters.
• Place square bars with a side of 5 cm on the waterproofing, using self-tapping screws, fix to the rafters.
• Fill the sheathing using boards 15-25 millimeters thick. Provide a sheathing step in such a way as to fix each of the transverse waves of the metal tile. It is important to maintain an interval of 0.5 m for corrugated sheets.
• Fasten the profile sheets to the base with self-tapping screws with an O-ring. Use a screwdriver. Position the screws perpendicular to the surface of the sheet. Screw without deforming the sheets or pushing through the washer.
• Install wind and cornice strips, install a ridge.

Specifics of installing slate and ondulin

Use the following algorithm to guide your work to ensure the roof is airtight:

• Mount the sheathing. Use boards with a thickness of 15 mm for ondulin, and 25 mm for asbestos-cement slate. Maintain a lathing interval of 30 centimeters.

• Install waterproofing using an underlayment type of roofing felt. Glue the layers with bitumen.
• Lay the sheets, provide a half-sheet overlap. Distortions are not allowed.
• Use special nails with a seal for fixing.
• Fix the ridge, and fix the cornice at the bottom.

You firmly believe that the overlapping technology is not difficult to understand. Be patient and buy everything you require.

Doing your own garage roof covering can be a satisfying project. You may guarantee a long-lasting, aesthetically pleasing roof that will shield your garage for many years by taking the time to select the best materials and adhering to installation instructions.

Choosing between contemporary rubber roofing, metal panels, or conventional shingles each has advantages and installation techniques of its own. You can achieve a professional-looking roof without hiring a contractor by carefully cleaning your roof, installing your chosen roofing material correctly, and securing underlayment.

Throughout the process, never forget to put safety first. When using roofing materials, make sure you wear the proper safety gear, collaborate with someone, and adhere to all manufacturer instructions. This project not only helps you save money, but it also gives you a sense of pride because you improved your property yourself.

Video on the topic

Major repair of the garage roof.

Roofing the garage for ONLY 3 thousand. Rub! The CHEAPEST, high-quality repair of the GARAGE ROOF with your own hands!

Repairing the garage roof alone is easy and without a burner. Self-adhesive roofing material #Rizolin

Major repair of the garage roof with your own hands.

Roof on the garage with your own hands.

Repair of the Garage Roof Quickly Simple and Cheaply

Do-it-yourself garage roof repair / soft roofing glassine TechnoNIKOL

DIY SINGLE-PIT ROOF for the GARAGE for one person