Decorative fur coat plaster: application technique, how to do it on the wall yourself

Plaster with decorative fur coat is a chic and well-liked option for giving walls some texture and personality. This method, which is well-known for its distinctive and lovely finish, can give any interior or outdoor space a modern makeover. This is an amazing effect that you can create on your own with the right supplies and a little perseverance.

Applying decorative fur coat plaster is a simple process, but it does need careful planning and close attention to detail. Initially, you will need to collect your supplies, which include a bucket, a trowel, a brush, and the plaster mix. Making sure the wall surface is clean and smooth before beginning is crucial, so make sure to get rid of any old paint, dirt, or debris.

Achieving the desired texture in plaster requires careful mixing. To achieve the proper consistency, adhere to the manufacturer’s instructions. When your plaster is ready, cover the wall with a thin, even layer using a trowel. The last step, which involves using a brush to create the distinctive textured pattern, is crucial to achieving the fur coat effect. To create the desired effect, gently and consistently drag the brush over the wet plaster.

Give the plaster time to fully dry before making any more changes. For the finished product to be durable and look good, this drying time is crucial. These easy steps will help you create a gorgeous decorative fur coat plaster wall that elevates and styles any area.

What is a fur coat facade finish

A textured coating on the wall is created using decorative material.

Crushed natural stones, which are used as special fillers in the mixture, are responsible for the effect. Their size determines how the finish looks. When treating large surfaces, the product is typically used to cover facades.

The finish can also be applied to interior spaces in modern interior design.

Features of fur coat plaster

Cement, sand, or lime are the main ingredients in the decorative mixture. To enhance the composition’s quality (elasticity, strength, and durability), specific fillers are added. Additives such as marble, glass, coal, and others can be added to the mixture.

Types of plaster

It is possible to purchase decorative material in powder or ready-made form. The first product is more costly and comes in buckets. It has synthetic polymers that enhance the elasticity and strength of the building mixture. Water is added to dilute the powder mixture (to the state of a liquid cream).

  • acrylic;
  • cement;
  • silicone;
  • silicate;
  • mineral.

Acrylic

The components of decorative plaster include a polymer dispersion for introduction, dolomite fillers, pigments, and unique additives that enhance the mixture’s performance characteristics and make application easier. The building material offers microbiological protection and is resilient to low temperatures, rain, and UV radiation.

Building facades are finished using an acrylic mixture; it is not suitable for use indoors.

  • fast setting;
  • ease of use;
  • high elasticity;
  • wide range of colors;
  • easy maintenance;
  • resistance to deformation;
  • low water absorption;
  • resistance to abrasion and mechanical damage;
  • affordable price;
  • good adhesive properties;
  • resistance to mold and mildew.

Painting acrylic facade plaster is not necessary, which makes construction work easier.

  • low resistance to ultraviolet rays;
  • gets dirty quickly;
  • low vapor permeability.

The ease of dirtiness of acrylic compounds is another drawback. Compared to other mixtures, dirt falls on them more quickly.

It is better to select a silicone facade mixture over other varieties (with a self-cleaning effect) if the house is situated near a highway or in the middle of a city.

  1. The ambient temperature should be above +10 degrees.
  2. It is important that there is no rain outside.
  3. Strong gusts of wind or heat also adversely affect the structure of the acrylic mixture.

Silicone

  • aesthetics;
  • durability;
  • color fastness;
  • large variety (manufacturers took care of a wide range of colors and different types of textures);
  • resistance to pollution;
  • ease of use;
  • low water absorption;
  • wide color range;
  • resistance to scratches and cracks.

Moisture cannot penetrate the silicone mixture. The building material is appropriate for completing structures close to forests and trees. Facade plaster is impervious to precipitation and inhibits the growth of microorganisms. One drawback is the price.

Other types of building materials

  • low price;
  • high elasticity;
  • resistance to fungi and mold.
  • low strength.

Insulated facades are finished with mineral plaster. Inside buildings, the fur coat solution can also be applied. The mixture stops dangerous microorganisms from growing.

Facade plaster “fur coat” is resistant to high and low temperatures, ultraviolet radiation and mechanical damage, has good adhesive properties.

  • good vapor permeability (allows walls to “breathe”);
  • strength;
  • resistance to microcracks;
  • low price;
  • fast setting;
  • long service life;
  • resistance to mechanical damage;
  • ease of use.

Plaster with 1.5 mm grain size is most commonly bought for wall decoration.

Plasters made of cement and lime enhance the wall’s capacity to withstand heat. Appropriate for surfaces vulnerable to mechanical harm. The fact that they get dirty easily is a drawback.

With the correct equipment and methods, decorative fur coat plaster is a chic and adaptable wall finish that you can easily apply yourself. This tutorial will take you step-by-step through the entire process, from plaster application to surface preparation and achieving the desired textured look. This distinctive and appealing finish can add texture and visual interest to any room, transforming it with a little perseverance and practice.

Application area for plaster

The finishing coating is made of decorative plaster. The construction material can be used for interior design as well as building facades. Plaster is frequently used to cover specific interior features, like borders and arches.

Advantages and disadvantages of fur coat finishing

  1. Saving money. Plaster is relatively inexpensive.
  2. Durability. The mixture has good performance characteristics.
  3. A wide range of. In specialized stores you can find a wide variety of decorative compositions.
  4. Various colors. There are various shades of plaster available on the market. Most often, white or gray finishing materials are purchased for the facade of a building.
  5. Aesthetics. Using a “fur coat” you can get a beautiful relief coating that will decorate the walls of any room.
  6. Good thermal insulation. Finishing materials protect the wall not only from cold, but also from the destructive effects of external factors (ultraviolet rays, rain, snow, wind).
  • perfectly hides defects and unevenness on the wall;
  • relatively inexpensive price;
  • long service life;
  • "volatile" materials;
  • possibility of multiple painting.

How to make wall plaster for the facade of the house "under a fur coat" yourself

Plaster for "fur coat" can be made by hand. To prevent small pieces of natural stone from sinking to the bottom of the package during storage and transportation, the contents of the package should first be mixed. Make a solution in a plastic bucket by following the manufacturer’s packaging directions and paying attention to the ratios.

Preparation for work and the necessary tools for applying plaster to the wall

There are various methods for applying decorative plaster to walls.

  • textured roller;
  • hand sprayer;
  • broom;
  • spatula (for smoothing small areas);
  • bucket (for preparing the solution);
  • gun (for distributing the mixture on the surface of the walls);
  • equipment for mixing the solution.

Prepare the surface by cleaning, degreasing, and drying the coating before beginning work. Seal surface protrusions and cracks. Prime the wall afterward.

Applying (base) plaster prior to the decorative "fur coat" coating is not required. The building material’s granular texture will conceal small blemishes and scratches on the foundation.

In addition, the wall is wet with water and allowed to dry before beginning the finishing process.

What material is used for interior and exterior wall decoration

When selecting a building material, you ought to exercise caution.

  1. If the purpose of the finishing is to renew the facade of the house, then it is recommended to choose cement-based compositions.
  2. Many experts recommend buying ready-made solutions, since they have good elastic and adhesive properties, retain their qualities even when the house shrinks.
  • quality of the material;
  • grain size;
  • cost;
  • setting speed;
  • ease of application.

In addition to providing an attractive layer, textured plaster should shield the wall from the elements—wind, cold, moisture, and sunlight.

Methods and techniques for applying a coating to a wall with your own hands

Since the cement-lime "fur coat" sets quickly, it should be applied continuously. The transition from one layer to the next will be visible on the surface even if you pause your work to mix a new solution, for example.

Decorative plaster can be applied in a variety of ways.

  1. Spatula and trowel. The first tool applies a layer to the wall, level it. The movement can be smooth or circular.
  2. Roller. This option is the most economical, allows you to form a uniform rough surface.
  3. Using a compressor. The machine helps to quickly and easily process the walls.
  4. Broom. This is the easiest way to apply a fur coat to the facade

You can achieve a different texture by utilizing various instruments and application methods. When finishing the surface, it is best to use specialized tools for a more effective "fur coat" on the facade.

Acrylic and silicone plaster application technique

  1. Finishing work should be done in the arid and warm season (at a temperature of + 5 … + 25 degrees and in the absence of precipitation).
  2. Before applying an acrylic mixture, it is necessary to prepare the base: it should be clean and primed. Slots and cracks should be close. Experts recommend using acrylic primer: it is left on the surface for 24 hours, they are waiting for complete drying. After this time, they begin to apply a decorative mixture.
  3. You can prepare an acrylic plaster "for a fur coat" with your own hands, the solution is prepared according to the manufacturer"s instructions, mixed in a bucket using a mixer.
  4. Then spread the mass on the wall with a spatula (made of stainless steel), you should get an even layer.

  1. Silicone mixtures have many advantages: they are durable, resistant to dirt (due to the self-cleaning effect), resistant to damage and vapor permeable. However, the decorative material should be applied correctly to protect the building"s façade for many years.
  2. The most important stage in finishing is the preparation of the walls. The base must be smooth, dry and free of dirt, otherwise it will reduce adhesion. The surface must be primed (this will strengthen the base). If such work has already been carried out several months before applying the plaster, the procedure should be repeated.
  3. The solution is prepared in a plastic bucket, following all the instructions. The prepared mixture can be applied to the walls manually or mechanically.
  4. Plastering should be done in appropriate conditions: the air temperature should be positive, no precipitation (not only during work, but also over the next few days). In bad weather conditions (heat, frost, rain), the coating is protected with a film or a dense mesh.

Technique for applying mineral compositions

The base of the walls should be prepared first; it needs to be dry, clean, and smooth.

The solution’s ratio needs to be correct. Never add more water to the mixture than what is specified on the package. For every 25 kg, the maximum volume is 5.5 liters. Too much liquid weakens the plaster’s structure and lessens its ability to withstand pollution and rain.

Apply the "fur" plaster to the surface after preparing. Both the layer’s thickness and the grain size must match. Use a roller, brush, and sprayer, among other tools, for the application.

Painting the facade is the last step in the finishing process. It lessens the absorption of water, strengthens the walls, and increases the coating’s resistance to pollution.

An additional technique for ornamental coating is the "rubbed fur coat." It has a smoother texture. Finishing materials applied correctly will resist fungus and algae for many years.

Brush and board

The technique is applicable to finishing on the inside as well as the outside. After dipping the brush into plaster and running the board over the bristles, the surface is covered in splashes.

How to apply a "fur coat" with a mesh

After pressing it up against the wall, a layer of trowel is applied on top. Once finished, the mesh is divided, giving the texture relief.

How to make a "fur coat" with a broom

After dipping the tool into the ready-made solution, the plaster is applied to the surface by brooming it in. Only small surfaces should be finished using this method due to its labor-intensive nature and the untidy appearance of the coating.

How to apply plaster with a fur coat effect with a roller

  1. The tool is dipped in the solution, after which the mixture is distributed over the wall.
  2. The plaster is applied to the surface with a spatula, then leveled with a textured roller.

How to apply plaster with a hand sprayer

This technique works well for both interior and exterior finishing.

  • cost-effectiveness;
  • easy to use;
  • aesthetics.

Plastering walls with a gun with a compressor

The solution is sprayed onto the wall’s surface by the tool. The hardware store sells the equipment for purchase or rental. Although pricey, the finishing is well-done and of excellent quality.

The main purpose of the tool is to finish large surfaces.

Technology for painting the facade of the house

The artisans paint the wall (any color they choose) once the surface has dried.

  1. Under the influence of the sun and moisture, the surface loses its original appearance.
  2. If defects appear on the facade, the color of the finish will be visible (on chips). For this reason, experts strongly recommend adding pigment (matching the color of the paint) directly to the "fur coat" for the facade (when mixing the solution).

Combinations give the wall a superior coating.

Decorative plaster KNAUF Diamant

Stronger and harder than before, it creates a comfortable interior microclimate. Ideal for every kind of room. You can use decorative plaster underneath a fur coat in any heated room (kitchen, bathroom), as long as the air humidity stays below 70%.

  • resistance to mechanical damage and abrasion;
  • does not shrink when drying;
  • moisture resistance;
  • vapor permeability (allows the walls to "breathe");
  • high strength.

An appropriate "fur coat" for sealing surfaces that are susceptible to mechanical harm (such as stairs, public spaces, and schools).

Lakra

  • provides an even layer;
  • hides minor defects;
  • resistant to atmospheric influences.

Elbrus

Accessible in white. Used on brick walls, putty, stone, and concrete.

  • strength;
  • durability;
  • resistance to atmospheric and mechanical influences.
Application Technique How to Do It Yourself
1. Clean and prepare the wall surface. 1. Make sure the wall is smooth and free from dust and grease.
2. Apply a primer to the wall. 2. Use a brush or roller to evenly spread the primer.
3. Mix the plaster according to instructions. 3. Follow the mixing guidelines on the plaster packaging.
4. Apply the first coat of plaster. 4. Use a trowel to spread a thin, even layer.
5. Create the decorative texture. 5. Use a roller or brush to create the fur coat texture while the plaster is still wet.
6. Let the plaster dry completely. 6. Allow adequate drying time, usually 24 hours.
7. Apply a protective sealant if desired. 7. Use a sealant to protect the finish and enhance durability.

Decorative fur coat plaster is an excellent way to give your walls character and texture. You can make boring surfaces stand out by using the appropriate tools and methods. It’s an easy do-it-yourself project that can dramatically improve any room’s appearance.

Make sure your wall is primed and clean before you start. To achieve a seamless, long-lasting finish, this step is essential. Next, get your plaster mix ready as directed by the manufacturer. It’s important to be consistent, so take your time to get it right.

Using a trowel, distribute the mixture evenly over the wall to apply the plaster. With the use of a specialized roller or brush, the "fur coat" effect is produced, giving the plaster its unique texture. To become familiar with the technique, practice on a small section first.

Allow the plaster to fully dry before applying any final details, like paint or sealant. This guarantees the surface’s durability and the preservation of the texture. You can get polished effects that really make your walls stand out with a little perseverance and work.

Video on the topic

How to apply decorative fur coat plaster to the facade of the house

Plaster (fur coat) for beginners! (100% method)

How to apply a side fur coat on a façade, do-it-yourself decorative plaster.

Which aspect of concrete application are you most interested in?
Share to friends
Andrey Ivanov

Experienced civil engineer with more than 20 years of experience. Specializing in the construction of industrial and civil facilities. Author of many publications in professional journals.

Rate author
StroyComfort1.com
Add a comment