Chisels for concrete hammer drill

Having the appropriate tools can make all the difference when taking on difficult concrete tasks. Concrete hammer drill chisels are necessary for effectively breaking, chiseling, and shaping concrete. These specialist chisels are made to work with hard, dense materials that are too tough for regular tools to handle.

Concrete hammer drills are strong instruments, but the kind and quality of chisel that is used determines how effective they are. Various tasks require different types of chisels, ranging from precise detail carving to the removal of old concrete. You can save time and effort by being aware of which chisel to use and how to use it correctly.

This guide will discuss the various kinds of chisels that are available for concrete hammer drills, their applications, and advice on selecting the right one for your job. Gaining knowledge about these tools will enable you to complete the task correctly, regardless of your level of experience with DIY projects.

Purpose

It’s far harder to do home repairs without a hammer drill. One tool used to work with metal or stone surfaces is the hammer drill. It’s employed for removing outdated finishes, making wire holes, etc. He must select the appropriate concrete chisel in order to accomplish this. This metal cutting tool, which resembles a long, cylindrical rod, is used to cut both stone and metal.

There are two parts to it:

• working cutting edge (cuts the base);
• butt plate – the final part that is attached to the hammer drill.

A mechanic’s chisel and a hammer drill chisel are very different from one another. The chisel’s one end is designed to be fastened to the hammer drill. Use the SDS shank for small devices (up to 5 kg), which is ideal for working with bases that are challenging to process, such as concrete, reinforced concrete, and others; for medium-sized devices (between 5 and 12 kg), use the SDS-max; and for large devices (above 12 kg), use the six-faced HEX mount.

A tool with four cutting edges and a rectangular cross section is called a metal chisel.

Types of chisels

The tool’s shape changes based on its intended use and location. The primary way to classify chies is by shape:

• Pick – looks like a cone or pyramid with a sharp end. With its help, holes are punched in a brick or concrete base (if there is no crown), remove old building materials. Excellent for working with reinforced concrete. It leaves torn edges, so its use is not recommended.
• Spatula – looks like a curved screwdriver, the cutting edge is wide and thin. With the help of such a chisel, old finishing material (for example, plaster), old asphalt are removed. They may look like a garden spade.
• Flat – looks like a screwdriver with a pointed tip. This is the most common and oldest type. The cutting edge varies between 1-4 cm. The smaller the size, the more effort must be applied when working.
• Special shape (strober) – this is a semicircular spatula that has a curved shape. A chisel is used to punch wall channels for wiring. These tools have wings along the length, which makes the work more convenient. These wings rest on the wall to adjust the depth. The edges of the hole after finishing work remain even. The diameter of the tool can vary, so they are suitable for both chasing a hole for wires and for laying a pipe. Such a chisel can be not only U-shaped, but also another, for example, a spatula bent upwards, which is used to remove old seams in brickwork.

What are concrete chisels made of?

Most frequently, forged steel (chrome vanadium, chrome molybdenum) is used to make chisels. The material is robust enough to guarantee effective functioning. The device is hardened between 750 and 8000 degrees Celsius. This depends on the grade of steel used in artisanal settings; low-carbon steel works well with 730-9500.

To ensure that there is no temperature difference between the internal and working parts, the device is heated uniformly throughout. It needs to be put in the oven after that. Rapid heating will not affect steel as well as this technology will. It needs to be quickly cooled with water or oil after heating. It has to be quite a bit of liquid.

The metal must first be quickly and gradually cooled from 650 to 400 degrees in order to achieve its maximum strength. You don’t have to worry that the liquid will start to evaporate and that the metal will become invisible in the process, appearing instead as if it is covered in steam. This procedure is typical. It offers gradual cooling. It will quickly cool down and this cocoon will vanish when the chisel is less hot.

To minimize a sudden drop in temperature and shrink the cocoon, the device needs to be slowly submerged in water with the cutting edge down and positioned perpendicular to the surface. It must then be agitated in various directions. This method will assist in maintaining the core’s dynamic while hardening the edges.

Do I need to sharpen concrete chisels?

The chisel’s sharpening angle is determined by the intended use of the tool. The sharpening angle’s sharpness is not a guarantee of its effectiveness. A chisel like that dulls easily. As a result, a medium-sharp angle must be made (for delicate bases, like cast iron or bronze, 700; for medium platforms, 600; for soft materials, like copper, 450; for aluminum and zinc, 350).

Thanks to long life technology, which essentially sharpens the blade while in use, perforator chisels for concrete rarely need to be sharpened. The chisel will function well with any base if it is sharpened properly and at the proper angle.

Although it is possible to sharpen the tool without one, it is necessary to use a cold liquid supply. In this instance, it is important to make sure the temperature stays below 1100 because a higher temperature will cause the tool’s strength and hardness to decrease.

The chisel should be uniformly wide and have uniform angles on all sides after sharpening. As a result, to properly sharpen a chisel, it must be turned in various directions while working slightly in each. After the task is completed, a truncated cone shape is created by removing the chamfer from the blade and shank. Such work exposes people to harmful dust.

For productive and successful work, selecting the appropriate chisel for your concrete hammer drill is essential. Employing the appropriate kind of chisel prolongs the life of your instruments and produces better results whether you’re chiseling, carving concrete, or taking on demolition tasks. This post will explain the various kinds of chisels that are available, their intended applications, and how to choose the best one for your concrete projects.

SDS-PLUS concrete chisels

These instruments are attachments for SDS-PLUS hammer drills, either light or medium. Thermal steel is used to make them. Their extended wear resistance is guaranteed by unique hardening and processing techniques. Shot blasting offers added protection. Carbide soldering also increases strength.

These instruments are used with hammer drills to chip away at masonry, concrete, or natural stone. SDS-PLUS works well for:

• grooving (chasing) – used to chisel grooves in masonry;
• flat (blade) tool, which is used to chisel concrete, masonry or natural stone;
• peak – for laying electrical networks, tearing off tiles, etc. d.

The instrument may be composed of a material that retains its sharpness or it may have a hard alloy insert in its edge.

A concrete hammer drill’s chisel selection can have a significant impact on the outcome of your project. Knowing which kind of chisel you need will help you complete the task quickly because each type has specific advantages of its own.

Keep in mind that choosing the appropriate chisel for the job not only increases efficiency but also prolongs the tool’s lifespan. Selecting the appropriate kind will ensure that you achieve precise results with less effort whether you’re working on demolition, chiseling, or groove cutting.

Knowing the various types of chisels and how to use them will help you make wise choices and confidently take on your concrete projects. If you keep these pointers in mind, you’ll be ready for any task that comes your way.

Video on the topic

Reinforced chisels BERGER® SDS chisels

Buchard for a hammer drill SdsPlus 16 Teeth (Buchard for SdsPlus 12)

What equipment to choose for a hammer drill? RIGHT CHOICE

How to choose chisels for a hammer drill